Rectangular Pipe-Zhongnan International Trade|Tinplate roll|Corrugated board

Rectangular Pipe

Seamless steel pipe and round billet pipe. The billet must be heated first. After heating, hollow tubes are formed through cold drawing or thermal expansion. Because of this special process, seamless tubes do not create any joints during manufacturing. Cumic manufactures seamless steel tubes of all types at low prices.

Tel：18522098737

Email：david@tjzhongnan.com

Key words： Rectangular Pipe

Category:

Steel pipe

Online inquiry

Related products

DESCRIPTION

ITEM	DIMENSION	PRODUCTION STANDARD	STEEL GRADE
SEAMLESS STEEL PIPE	1/8° -24"	API 5L.ASTM A106.ASTM A53 .ISO3183.IPS.ETC	A(B(X42.X46.X52. X60.X70
ERW	1/2" -24"	API 5L.API 5CT.ASTM A53.ASTM A500.GB9711-1/ 9711.2.IPS.ISO.etc	A.B.X42.X46.XS2.XS6, X60, X65. X70. JSS.N80-1, N80Q . M80Q . M6S.L80-1, C90-1. C90-2 . C95 . T95-1. T95-2.P110.9711.9712
LASW	16" -56-	API5L.IPS.GB.BS. ASTM A53 ASTM A500.JIS.ISO.etc	A.B.X42.X46.X52.X56, X60.X65, X70, ST37.ST52
SSAW	3" -80"	API 5L.API 5CT.ASTM A53.ASTM A500.GB9711.1/ *9711.2 ^IPSJSO.etc**	A.B.X42.X46.X52.X56, X60(X65( X70, ST37,ST52,Q235,Q345
HOLLOW SECTION (CHS(RHS.SHS)	*10mm 10mm* 500mm* 500mm**	ASTM A500.GB6728	A.B.C. Q195.Q215.Q235.Q345
	*10mm 15 mm-500mm300mm*
	1/2M -8H
GALVANIZED STEEL PIPE	*1/2" -3"*	ASTM A53.ASTM A500.BS1387.GB3091	A.B.Q195.Q215.Q235,

Related products

I Beam

I Beam is a long strip of steel with an I-shaped section. I - beam ordinary I - beam and light - beam, H - beam three. I beam is widely used in various building structures, Bridges, vehicles, supports, machinery and so on. Ordinary I-beam and light I-beam wing root gradually thinning to the edge, there is a certain Angle, ordinary I-beam and light I-beam type is expressed by the Arabic number of the number of centimeters of the waist height, web, flange thickness and flange width of different specifications to waist height (h) x leg width (b) x waist thickness (d) millimetres

Steel Angle

steel angle can be composed of various stress members according to the different needs of the structure, and can also be used as the connection between members. Widely used In a variety of building structures and engineering structures, such as beam, bridge, transmission tower, lifting machinery, ships, industrial furnaces, reaction towers, container racks, cable trench support, power piping, busbar support installation, and warehouse shelves. steel angle is a carbon structural steel for construction. It is a section steel with simple section. It is mainly used for metal components and plant frames. The raw billet for steel angle production is low carbon square billet, and the finished steel angle is delivered in hot rolled forming, normalizing or hot rolled state. Type specification It is mainly divided into equilateral steel angle and unequilateral steel angle, among which unequilateral steel angle can be divided into two kinds: unequilateral and unequal thickness. The specifications of steel angle are expressed by the dimensions of side length and side thickness. At present, domestic steel angle specifications for 2-20, to the side length of the centimeter number as the number, the same number of steel angle often 2-7 different thickness of the side. The inlet steel angle shall indicate the actual size and thickness of both sides and indicate the relevant standards. Generally, the side length above 12.5cm is large steel angle, the side length between 12.5cm and 5cm is medium steel angle, and the side length below 5cm is small steel angle.

H-beam

H-beam is a structural steel beam. It is called an H-beam because the H-beam on its cross section is of equal thickness in two parallel flanges and has no taper on the inner surface. H beam is a versatile product, widely used in a variety of structural applications.